weinor BiEasy 15M Go!, Operating Instructions Manual

Page: 67 / 88

Ⓒ weinor GmbH & Co. KG EN | 67
4.4.2 Status LED
A radio signal is indicated by the status display (LED ring
around the
STOP button) lighting up.
The status LED can display different colours:
Status display (status LED) and its significance
flashing orange Channel not yet programmed
in any receiver
quick flashing orange Channel in programming
mode, operation of already
programmed receivers not
possible. In group program-
ming mode, permanent
illumination every 3 seconds
orange then green Receiver has received and
responded to the signal sent
by the radio transmitter
orange then flashing red Receiver has not received
the signal sent by the radio
transmitter
orange, alternating 2x,
then red
Channels in receiver and
radio transmitter deleted
Tab. 8 Status display and its significance
The transmitting power or the radio range will be reduced
through the reduction in the performance of the battery
(decrease in capacity). If the status LED no longer illumi-
nates upon pressing the button, the batteries have to be
replaced (see Section 4.7, Changing the batteries).
BiEasy-15Mgo_weinor_BA_1811EN_0218.indb 67 26.02.2018 13:50:47