automatic selection of the appropriate charging mode for charging
Charging cutoff
Voltage:
Ni-MH/Ni-Cd:1.45v±0.05v;
Li-ion:4.2V±0.05V;
Battery Charging
Current:
For different slots, the microcomputer management system automatically distributes the
charging current,
1,2 slot Charging current is 1000mA Max, 3,4 slot charging current is 850mA, 5,6 slot charging
current is 500mA
USB Output function:
Specifies that the 1th slot, 2 slot provides output power to the USB (under the condition of
loaded 18650 batteries), this product itself does not include battery.
Output is 5V/1A, USB automatic recognition output function, load 1000m A current, its port
output voltage: 4.75v-5.25v.
Discharge cutoff voltage: 3.0±0.2v.
Protection function:
Over charge protection,Over discharge protection, short circuit protection, intelligent
identification of bad batteries and reverse battery detection protection.
LED Display charging
status
Red: 25% Yellow: 50% green: 75% Blue: 100%
Certification
：
CE
，
FCC
，
Rohs
Product Net weight
130g+20g
（
micro cable
）。
Product Dimensions
：
57mm× 59mm×98mm(L/W/H)
。
Compatible Battery types:
3.7V Lithium-ion battery:
18650, 14500, 10440
1.2V Ni-MH/Ni-Cd battery:
AA, AAA
How to use
1. How to use the battery charger function (product charging mode):
Charge the battery, press the unlock key, open the lid, battery positive upward, battery negative downward, put battery
in the battery slot, cover the lid, the charger through the micro USB cable connected to the 5V2A power supply, and then
power the charger, the Led light corresponding to the battery, the battery light bright blue indicates full, charge complete,
and then press the unlock key., open the lid, take out the fully charged battery, then the user can use the fully charged
battery.
2. How to use the mobile power function to charge mobile phones or other digital products (product discharge mode)
In this charger USB output port plugged into the mobile phone charging cable or other digital products USB charging
cable, connected to the phone or other digital products, press the Unlock key, open the lid, in the first slot and the
second slot placed in the 3.7V 18650 Li-ion battery, cover the lid, 6 sets of LED indicators will instantly light, it is in
normal charger self-test, After that ,Will charge the phone and other digital products, and will display 1 slots or 2 slots of
18650 battery power energy percentage. However, because the 3.4.5.6 slot is not an input source for mobile power
supplies, so their related LED indication does not display their power energy percentage in discharge mode.
When the electronics product load are full, the output will automatically stop, 18650 battery power indicator lights off, if
you want to recharge again, please press the Power key again to activate the charger, 18650 battery power energy LED
