OWNER MAINTENANCE
(see the following pages for instructions)
BEGINNING OF SEASON
Contact your boiler service technician to inspect, service and start
up your boiler. You must have an annual start-up performed by a
qualified service technician to ensure reliable operation of the boiler
and system.
DAILY
Check boiler area.
Check air openings.
Check pressure/temperature gauge.
Verify boiler front door is securely 2 closed.
MONTHLY
Check vent piping.
Check air piping.
Check relief valve.
Check condensate drain system.
Check automatic air vents (if used).
PERIODICALLY
Test low water cutoff.
Check time and date on the control display.
EVERY
6 MONTHS
Check boiler piping (gas and water).
Operate relief valve.
END
OF SEASON
Shut boiler down (unless boiler used for domestic water).
Follow the service and maintenance procedures given throughout this manual and in component literature shipped
with the boiler. Failure to perform the service and maintenance could result in damage to the boiler or system. Failure to
follow the directions in this manual and component literature could result in severe personal injury, death or substantial
property damage.
10
SlimFit
®
Series 2
commercial
condensing
gas
-
fired
water
boiler
-
User’s Information Manual
Part number 550-100-181/0517
Figure 10
Service and maintenance schedules
Annual startup and general maintenance
