21
%&36,QVWDOODWLRQDQG2SHUDWLRQ0DQXDO
OLPLWPXVWEHVHWDERYHWKH6HW3RLQW3/86WKH/DROG3/86WKHQRUPDOGURSH[SHULHQFHGLQWKHSLSLQJ
8VLQJWKHSUHYLRXVH[DPSOHRID3VL/DROGZLWKD3VL6HW3RLQWWKHERLOHUV¶OLPLWVPXVWEHVHWHQRXJKRYHU3VL
to prevent the boilers’ internal limits being reached. In this situation, the boiler high limit should be set at approximately 12 Psi
to prevent the difference in boiler pressure vs. header pressure causing erratic operation.
'$<1,*+76&+('8/(6
Button:
MENU/<System Settings>/<Setback Schedule>/Day Schedules
7KH%&36KDVWZROHYHOVRIKHDW7KH'D\OHYHOLVXVHGZKHQDEXLOGLQJLVRFFXSLHG
and people are active.
7KH1LJKW6HWEDFNOHYHOLVXVHGZKHQDEXLOGLQJLVQRWRFFXSLHGRUZKHQSHRSOHDUH
sleeping. This setting reduces the set point by the Setback setting. If the Day calculated
pressure was 8 Psi and the Setback was 3 Psi, the Night Schedule will run at (8 Psi -
3VL 3VL
-- DAY SCHEDULE ----
07:**Am
BACK
SAVE
-- NIGHT SCHEDULE --
10:**Pm
BACK
SAVE
6(735(6(177,0(
Button:
MENU/<System Settings>/<Setback Schedule>/Present Time
Button:
MENU/<Maintenance>/Present Time
7KH7LPHLVXVHGIRU'D\1LJKW6FKHLVWRU\JUDSK
$GMXVWWKHWLPHE\VHOHFWLQJ7LPHIURPWKHPHQXDQGWKHQVFUROOLQJWKURXJKWKHKRXUV
followed by the minutes. If hours are to be set to PM, scroll through the AM hours to
reach the PM hours.
- SET PRESENT TIME
**:**
BACK
SAVE
$/(57
Remember that the battery is used as a time backup. If no power is supplied to the BCP-8S, the battery will die in
three months and time clock values will be lost. Thus, DO NOT power down the control during off-season.
&20%867,21$,5'$03(523(5$7,21
The BCP-8S controls multiple relays each controlling different types of equipment. In addition to the control of the boilers, it can
control a combustion air damper. See Comb. Air Damper 1
.
58121
$GMXVWDEOHIURPWRPLQXWHV
'HIDXOWPLQXWHV
Hold Button:
MENU/<System Settings>/Run-On
7KH5XQ2QDSSOLHVWRWKH6\VWHPDQG&RPE$LUUHOD\V)RUWKH6\VWHPUHOD\LWLVXVHG
to dissipate the excess energy from the boilers.
)RUDFRPEXVWLRQDLUGDPSHULWEULQJVLQHQRXJKIUHVKDLUIRUWKHQH[WERLOHU¿UHXS
7KH5XQ2QWLPHVKRXOGEHVHWEDVHGRQWKHVL]HDQGW\SHRIWKHHTXLSPHQW
------- RUN-ON -------
2min
[
]
BACK
SAVE
6<67(0(;(5&,6(
$GMXVWDEOH2II2Q
'HIDXOW2II
Hold Button:
MENU/<System Settings>/System Exercise
7KH%&36SURYLGHVDQRSWLRQWRH[HUFLVHWKH6\VWHPUHOD\IRUVHFRQGVZKHQQRW
used for seven days.
- SYSTEM EXERCISE -
Off
On
BACK
SAVE
0$,17(1$1&(
Hold Button:
MENU/<Maintenance>
The Maintenance menu gives access to sensor trimming. In addition, you will have access to
YLHZWKH6WDUWXSFRQ¿JXUDWLRQVHWWLQJVDVZHOODVVHQVRUKLVWRULHV
$/(57
To be able to change the BCP-8S settings the Program/Run Switch must be set
to Program. The switch is located under the Enclosure Wiring Cover for security.
The Enclosure Wiring Cover can be securely closed using a padlock.
---- MAINTENANCE ----
Standard
English
Present Time12:30P
<Sensor Trim>
<Histories>
<Configuration>
BACK
SELECT
