*Note:
It takes around 20 seconds before the sound will play “Pairing mode” and the red LED
light starts flashing.
Tap the “Go To Connect Sync Module Wi-Fi” button and select the Wi-Fi hotspot named
VPaiHome_xxxx. The password is: 12345678. After the connection is established, the “Config
Current Sync Module” button becomes clickable when you return to “Config Sync Module”
interface. The screen prompts will show as follows:
Connect the Sync Module to the power supply.
Tap “Start Config” button after
hearing the
sound “Pairing mode” and when
the red LED light on the sync module starts flashing.