上
海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
43
/
47
After setting, click
Start
to start machining:
•
The system executes length compensation based on
Length Wear Increment
of all tool.
•
After completing machining once, the values of
Finished Times
automatically
adds 1 and the system judges whether
Length Comp Interval
has reached.
–
Reach: the system accumulates a
Length Wear Increment
to the value
of
Real-time Length Comp
and judges whether the value of
Real-time
Length Comp
exceeds the value of
Max Length Comp
.
•
Exceed: an alarm
The compensation values of automatic layer
compensation exceeds the upper limit. Cannot continue machining!
pops up and machining with current tool stops.
•
Not exceeded: machining continues.
–
Not reached: the value of
Real-time Length Comp
keeps unchanged and
machining continues until the value of
Finished Times
is equal to the
value of
Length Comp Interval
.
5.
Frequently Asked Questions(FAQ)
This section contains answers to common questions in
NcStudio V12 CCD Control
System
.
For additional questions, contact our technical sales engineers.
5.1.
May Errors Exist in the CCD? If Errors Exit, Why It Happens?
Errors may exists in the CCD.
The image algorithm takes pixel as its unit and its accuracy is ±1 pixel.
Example
If the magnification is 200, that is, 200 pixels corresponds to 1 mm, then the error
range in the CCD is ±0.005.
5.2.
How Much Error Does the Finished Workpiece Exist in the
CCD?
The error value at the shooting point is ±1 pixel and the error value of the finished
workpeice is determined by specific workpieces.
