WEIGL ProCommander 2, Instruction Manual

Page: 61 / 87

DMX-Read in
61
7 DMX-Read in
Via the pins 4 and 5 DMX can be read in. As a result, the
external DMX -univers can be merged into the internal generated
DMX -signal. Furthermore, the integrated map function can be
used to control the internal periphery of the ProCommander LTC
via the external
DMX -signal. So, all of the analogue-, servo -, the 8
PWM -, and the 16 digital output channels can be assigned to the
external DMX -signal.
7.1 Merge-function
An external DMX -signal can be integrated into the internal
DMX -signal through the merge-function.
This section can through the configurator as well as with the
commands "Set-Merge-Start" and "Set-Merge-End" defined. For
further information refer to the ASCII-command table in the
ASCII-chart .
Different merge-modes define how the external signal is
integrated into the internal signal.

Merge LTP:
Both values will be compared and the lowest value will be
transferred into the output-signal.

Merge HTP: