Weight Watchers WW800A, Manual

Page: 8 / 12

Set Gender/Activity Mode
1. Press SET button. Default gender icon will flash. Press the UP or
DOWN button to choose between female, male, female athlete
and male athlete modes. In order to choose the male/female athlete
setting, press SET when both the correct gender icon and the running
person icon lights up.
2. Press SET button to confirm selection. The scale will display the user data for a
few seconds and then will enter into body analysis mode and “0.00” will appear on
the display.
NOTE:
If you are largely sedentary, lightly or moderately active (a moderately active person
might walk 2.4 - 4.8km per day in addition to daily activities), choose the regular male
or female gender icon. Choose the athlete setting (regular gender icon plus running
person icon) if you are involved in 10 or more hours of intense physical activity
per week (walking more than 4.8km per day, aerobic workouts, etc.), in addition to
daily activities. Most people will fall into the lightly/moderately active category.
Display and Store Data
1. Data setting is now complete.
2. User data displays for a few seconds.
3. The scale is now ready for body analysis measurements.
NOTE:
In personal data setting mode, the scale returns to standby mode automatically if
no button is pressed within 15 seconds.
Body Analysis Measurement
1. Tap the scale on in standby mode and wait
until “0.00” appears and then press the USER
button to select your user number and recall the
programmed data. Display will then show “0.00.”
2. Step on the scale barefoot with your feet aligned
on the metal strips. Feet should be centered on the
electrodes and on the scale for most accurate
readings. Weight shows for several seconds.
3. Scale now enters body analysis mode and
now shows “
Cm
” while data is being acquired.
4. The scale shuts off automatically.
NOTES:
If you step on the scale before “0.00” appears, the scale will not function properly.
Scale will show “Err” if there is improper foot contact
in the body analysis mode, for instance, when you stand on the scale
with socks or shoes on. Hard or dry skin can prevent you making prop-
er contact with electrodes on the surface of the scale. Try applying a
small amount of moisturiser to your feet before using the scale. Step on
carefully to avoid slipping on the surface.
Cm
Cm
Cm
Cm
Cm
Cm
Cm