Weidmüller 2453830000, Original Operating Instructions

Page: 27 / 186

2516410000/03/07.2019 27
6 LED indicators and troubleshooting
In case of any fault, the tool will be switched
off and remain disabled. The service LED will
glow red or orange. You can proceed with
your work only after the battery has been
exchanged or removed for short time and is
then re-inserted (reset).
If the malfunction persists even after such
a reset, please contact the Weidmüller af -
ter-sales service.
6.1 Operating/service LED
LED-Display Cause Recommended action
After battery insertion
green (2 seconds) The tool is ready for operation.
steady orange The temperature is outside the tolerance range.
►
Cool or warm the device.
steady red The battery is empty. ► Change the battery.
After application (cycle)
green (2 seconds) Procedure successfull, the working value is OK.
steady orange The temperature is outside the tolerance range. ► Cool or warm the device.
flashing red The working value is at the limit. ► Contact the service centre.
steady red The working value is outside range. ► Return the tool to customer service.
flashing red/green
The working value is OK but the service interval
is exceeded.
► Authorise the service
6.2 Supply voltage LED
LED-Display Cause Recommended action
After battery insertion
steady green The tool is ready for operation.
steady red The battery is empty. ► Change the battery.
After application (cycle)
flashing red
The battery charge is below 10 %. ► Change the battery.
steady red The battery is empty. ► Change the battery.
steady red The working value is outside range. ► Return the tool to customer service.
flashing red/green
The working value is OK but the service interval
is exceeded
► Authorise the service