11 Disassembly and disposal
WARNING
Dangerous contact voltage!
▶
All installation and wiring work must be
carried out with the power supply discon-
nected.
▶
Make sure that the place of installation
has been disconnected from the power
supply!
11.1 Disassembling the u-remote module
▶
Remove all cables and lines.
▶
Unscrew the mounting screws on the module.
▶
Please observe the instructions for proper disposal.
11.2 Disposing of the u-remote module
ATTENTION
Products in the u-remote series are subject
to WEEE (EU Directive 2012/19 EU), which
regulates the collection and recycling of elec-
trical and electronic equipment.
▶
Make sure that disassembled products are
properly disposed of!
When all u-remote products reach the end of their life cycle,
you can return them to Weidmüller, and we will arrange for
their proper disposal. This also applies to countries outside
the European Union.
▶
Please pack the products properly and send them to your
responsible distributor.
You can find the address of your respective country repre
-
sentative on the Weidmüller website.
11 Disassembly and disposal
| Disassembling the u-remote module
43
2484940000/00/02.2017
Manual UR67-Multiprotocol
