- 11 -
IE-SW-PL09M-5GC-4GT DIP Switches
The default setting for each DIP Switch is OFF. The
following table explains the effect of setting the DIP
Switch to the ON position.
“Turbo Ring” DIP Switch Settings
DIP 1
DIP 2
DIP 3
DIP 4
Reserved for
future use.
ON: Enables this
Ethernet Switch
as the Ring
Master.
ON: Enables the
default ―Ring
Coupling‖ ports.
ON: Activates
DIP switches 1,
2, 3 to configure
―Turbo Ring‖
settings.
OFF: This
Ethernet Switch
will not be the
Ring Master.
OFF: Do not use
this Ethernet
Switch as the ring
coupler.
OFF: DIP
switches 1, 2, 3
will be disabled.
“Turbo Ring V2” DIP Switch Settings
DIP 1
DIP 2
DIP 3
DIP 4
ON: Enables the
default ―Ring
Coupling
(backup)‖ port.
ON: Enables this
Ethernet Switch
as the Ring
Master.
ON: Enables the
default ―Ring
Coupling‖ port.
ON: Activates
DIP switches 1,
2, 3 to configure
―Turbo Ring V2‖
settings.
OFF: Enables the
default ―Ring
Coupling
(primary)‖ port.
OFF: This
Ethernet Switch
will not be the
Ring Master.
OFF: Do not use
this Ethernet
Switch as a ring
coupler.
OFF: DIP
switches 1, 2, 3
will be disabled.
NOTE
You must enable the Turbo Ring function first before using the DIP
switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the DIP switches to be the Ring Master,
the Turbo Ring protocol will automatically choose the switch with
the smallest MAC address range to be the Ring Master. If you
accidentally enable more than one switch to be the Ring Master,
these switches will auto-negotiate to determine which one will be
the Ring Master.
