12
ATTENTION
To actively update DIP switch settings, power off and then
power on the Ethernet Switch.
LED Indicators
The front panel of the Ethernet Switch contains several LED indicators.
The function of each LED is described in the following table.
LED
Color
State
Description
PWR1
AMBER
On
Power is being supplied to power
input P1.
Off
Power is not being supplied to
power input P1.
PWR2
AMBER
On
Power is being supplied to power
input P2.
Off
Power is not being supplied to
power input P2.
10/100M
AMBER
On
TP port’s 10 Mbps link is active.
Blinking
Data is being transmitted at 10
Mbps.
Off
TP Port’s 10 Mbps link is inactive.
GREE
N
On
TP port’s 100 Mbps link is active.
Blinking
Data is being transmitted at 100
Mbps.
Off
TP Port’s 100 Mbps link is inactive.
100M
GREEN
On
FX port’s 100 Mbps link is active.
Blinking
Data is being transmitted at 100
Mbps.
Off
FX Port’s 100 Mbps link is inactive.
PoE+
AMBER
On
Power is being supplied to Powered
Device (PD)
Off
Power is not being supplied to
Powered Device (PD)
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect the Ethernet
Switch 10/100BaseTX ports to any kind of Ethernet device, without
needing to pay attention to the type of Ethernet cable being used for the
connection. This means that you can use either a straight-through cable
or cross-over cable to connect the Ethernet Switch to Ethernet devices.