8
TROUBLESHOOTING AND MAINTENANCE
Inspect and properly tighten all parts each time you
use the stepper. Clean the stepper using a soft cloth
and mild, non-abrasive detergent.
To prevent damage to the console, keep liquids away
from the console and keep the console out of direct
sunlight.
BATTERY REPLACEMENT
The console requires one type-LR44 watch battery. To
replace the battery, gently pry off the top of the con-
sole. Remove the old battery from the holder and
insert a new battery in the same position. Press the
top of the console back into place.
REED SWITCH ADJUSTMENT
If the console does
not function proper-
ly, or if the display
becomes faint, the
batteries should be
replaced. See BAT-
TERY REPLACE-
MENT at the left.
If the console still
does not function
properly, the Reed
Switch (12) should
be adjusted. Raise
or lower the Right
Pedal Leg (7) until the Magnet (26) is aligned with the
Reed Switch (12). Refer to the inset drawing. Slide the
Reed Switch (12) in or out slightly. The gap between
the Reed Switch and the Magnet should be about 1/8”.
Make sure that the Magnet will not hit the Reed Switch
when the Pedal Leg is moved. Repeat until the con-
sole displays correct feedback.
7
12
26
