8
6. Apply some of the included grease to an M10 x
85mm Bolt (23). Attach the Backrest Frame (5) to
the Frame (1) with the Bolt and an M10 Nylon
Locknut (19).
Do not overtighten the Nylon
Locknut; the Backrest Frame must pivot easily.
Attach the tether on the Locking Pin (21) to the
bottom of the Frame (1) with an M4 x 16mm
Screw (28). Next, insert the Locking Pin into the
Frame and into an adjustment hole in the Pivot
Bracket (6).
Attach an M10 x 20mm Bolt (25) and an M10
Nylon Locknut (19) to the hole in the end of the
Pivot Bracket (6).
See step 5.
Tighten the M10 Nylon Locknuts (19).
6
5
1
25
19
19
6
21
Tether 28
7.
Orient the Backrest (7) as shown.
Attach the
Backrest to the Backrest Frame (5) with four M6 x
16mm Screws (24).
7
7
5
24
24
8. Attach the Seat (8) to the Frame (1) with four M6
x 60mm Screws (17) and four M6 Washers (22).
8
1
22
22
8
17
9.
Make sure that all parts are properly tightened before you use the weight bench.
Grease
23
Summary of Contents for WEBE0638.0
Page 13: ...13 NOTES...
