background image

4

Thank you for selecting the versatile WEIDER

®

320

weight bench. The WEIDER

®

320 is designed to be

used with your own weight set (not included) to help
you develop every major muscle group of the body.
Whether your goal is a shapely figure, dramatic
increase in muscle size and strength, or a healthier
cardiovascular system, the WEIDER

®

320 will help you

achieve the specific results you want.    

For your benefit, read this manual carefully before
using the weight bench. 

If you have additional ques-

tions, please call our Customer Service Department

toll-free at 1-800-999-3756, Monday through Friday, 
6 a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
number and serial number before calling. The model
number is WEBE09310. The serial number can be
found on a decal attached to the weight bench (see
the front cover of this manual).

Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.

Seat

Leg Lever

Weight Tube

Curl Pad

Adjustment Tube

Backrest

Weight Rests

Adjustment

Knob

BEFORE YOU BEGIN

Right Side

Left Side

Note: The terms “right side” and “left side”
are determined relative to a person sitting on
the bench; they do not correspond to what is
right and left on the drawings in the manual.

Summary of Contents for Victory Club Series 320

















Reviews: