7
4.
Insert the Front Stabilizer (3) into the Front Leg
(2). Attach the Front Stabilizer with two M10 x
20mm Bolts (30), one M10 x 75mm Bolt (33), four
M10 Washers (39), and one M10 Nylon Locknut
(38) as shown.
Tighten the M10 Nylon Locknuts (38) used in
steps 3 and 4.
30
33
39
39
39
38
2
3
4
2.
Attach the Dumbbell Stand (5) to the Dumbbell
Base (7) with two M10 x 75mm Carriage Bolts
(36) and two M10 Nylon Locknuts (38).
3.
Insert the Rear Stabilizer (4) into the Frame (1).
Attach the Rear Stabilizer with two M10 x 20mm
Bolts (30), one M10 x 75mm Bolt (33), four M10
Washers (39), and one M10 Nylon Locknut (38)
as shown.
Do not tighten the Nylon Locknut
yet.
2
5
38
38
36
1
30
33
39
39
38
39
4
3
7
