6
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
• To hire an authorized service technician to
assemble the weight system in your home, call
1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, the weight sys-
tem should be assembled in the location where it
will be used. Make sure that there is enough
clearance to walk around the weight system as
you assemble it.
• Place all parts of the weight system in a cleared
area and remove the packing materials. Do not
dispose of the packing materials until assembly is
completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• As you assemble the weight system, make sure
all parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools:
the included hex key(s)
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight system can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
1.
Attach the Rear Stabilizer (5) to the Base (1) with
two M8 x 76mm Carriage Bolts (59) and two M8
Locknuts (74).
See the inset drawing.
Press the two Base Caps
(38) onto the Base (1).
1
1
1
5
59
74
38
38
74
Before beginning assembly, make sure that
you understand the information in the box
above.
Summary of Contents for Club 8980 W
Page 24: ...24 NOTES...
