Weider 9930 User Manual Download | Manualshive

Page: 3 / 31

background image

3

IMPORTANT PRECAUTIONS

WARNING:

To reduce the risk of serious injury, read the following important precau-

tions before using the weight system.

1. Read all instructions in this manual and in

the accompanying literature before using the
weight system.

2. It is the responsibility of the owner to ensure

that all users of the weight system are ade-
quately informed of all precautions.

3. The weight system is intended for home use

only. Do not use the weight system in a com-
mercial, rental, or institutional setting.

4. Use the weight system only on a level sur-

face. Cover the floor or carpet beneath the
weight system to protect the floor or carpet.

5. Regularly inspect and tighten all parts.

Replace any worn parts immediately.

6. Make sure that the cables remain on the pul-

leys at all times. If the cables bind while you
are exercising, stop immediately and make
sure that the cables are on all of the pulleys.

7. Keep children under the age of 12 and pets

away from the weight system at all times.

8. Always wear athletic shoes for foot protec-

tion while exercising.

9. Keep hands and feet away from moving parts.

10. Always stand on the foot plate when perform-

ing an exercise that could cause the weight
system to tip.

11. If you feel pain or dizziness while exercising,

stop immediately and begin cooling down.

12. Never release the press arm, butterfly arms,

leg lever, lat bar, or nylon strap while weights
are raised. The weights will fall with great
force.

13. Always disconnect the lat bar or nylon strap

from the weight system when performing an
exercise that does not use the attachments.

14. The warning decals shown below have been

attached to the weight system in the loca-
tions shown. If a decal is missing or illegible,
please call our Customer Service Department
at the number on the front cover of this man-
ual to order a free replacement decal. Apply
the new decal in the appropriate location.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

All manuals and user guides at all-guides.com

«
1
2
3
4
5
...
»

Summary of Contents for 9930
































Reviews:

No comments

Related manuals for 9930

Brand: ABB Pages: 36

Brand: ABB Pages: 40

Brand: NARGESA Pages: 50

Brand: XAG Pages: 24

Brand: ICP DAS USA Pages: 45

Brand: R&S Pages: 2677

MIAMI J ADVANCED

Brand: Össur Pages: 35

Brand: Össur Pages: 38

Brand: Össur Pages: 8

Brand: Össur Pages: 72

Brand: Össur Pages: 76

Miami Lumbar Posteo

Brand: Össur Pages: 45

Brand: Össur Pages: 29

Icelock Clutch 211

Brand: Össur Pages: 26

i-limb hand Series

Brand: Össur Pages: 27

i-Digits Quantum

Brand: Össur Pages: 231

Brand: Kelvin Pages: 30

Quadro A Legs 3P 120 Degree Workstation with...

Brand: Jason.L Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands