WEIBANG SC409H Operator'S Manual Download Page 31

 28

WEIBANG Warranty Statement 

 

WEIBANG GARDEN MACHINE COMPANY LIMITED guarantees all WEIBANG sod cutter to be 
free from any manufacturer’s defects in material and workmanship for a period of 1 year from the 
date of purchase. This warranty is exclusive of the engine (please consult the accompanying 
engine manual with your unit for details), and any normal wear and tear and/or consumable parts, 
such as, but not limited to, flails, spacers, clutch, clutch lining, drive belt, and throttle cable. All 
normal wear and tear and/or consumable parts are protected from manufacturer’s defects in 
material and workmanship for a period of thirty (30) days from the date of purchase.   
 

Weibang Warranty Summary                                                                        Protection 

1. WEIBANG Professional Sod Cutter Unit                         1year parts and labour  
2. Belt and tire                                                 90 days parts and labour 
3. WEIBANG normal wear and tear parts   
or consumable parts                                          30 days parts and labour 
4. Engine                                           Consult with engine manufacturer  
 
To make a warranty claim within this time period, please contact WEIBANG’S local dealer or 
WEIBANG’s exclusive national distributor, who will advise the validity and claim procedure. Once 
the claim has been accepted, if it is needed, the unit and/or parts should be shipped to the 
specified Authorized Service Centre at the customer’s expense. Be sure to securely pack the unit 
and parts in a strong container. Damage in transit is not covered by this warranty.   
 
Warranties expressed in this document are void if repairs are attempted by anyone other than an 
Authorized Service Centre or WEIBANG’s exclusive national distributor, or if the unit has been 
modified from original factory design in any way. This warranty is expressly conditional upon the 
customer’s compliance with all precautions and instructions contained in this manual and 
excludes any claims made as a result of abuse, neglect, accident, normal wear and tear and 
misuse. This warranty is nontransferable.   

   

 

Email your technical questions and comments to: 

[email protected] 

visit our website: 

www. weibang.com 

 

 

 

 

 

Summary of Contents for SC409H

































Reviews: