8�3
Disconnection
Î
After the end of the testing procedure, fully vent the media
line.
Caution:
First depressurize the system before releasing
the connection. The integrated safety system will not let
you open the pressure-aided clamping jaws when the
system is pressurized.
Î
Pressurize the pilot pressure line. The clamping jaws
(Pos. 3) close together, the connection to the test piece
is released and the test piece can be removed straight
backwards (
Attention:
In the event that you cannot remove the test
piece from the connector:
- Wait a few moments
- Never use excessive force
- Do not use any tools (e.g. hammer)
- Make sure that the operating pressure is completely
relieved
Figure 6
Figure 5
MD-10320-L51-R1.0.0-03
Page 18
Operating instructions
AE
