2. INTENDED USE
- The WEH
®
TSF4 H
2
Filter has been developed for the installation in H
2
vehicles and
fueling stations.
Î
Always ensure that the WEH
®
Product is used only within the range of its intended
use. Please note in particular the technical data of the WEH
®
Product in
as
well as the marking on the WEH
®
Product itself.
- When used at sea or in the vicinity of the sea, increased salt and moisture content
of the air may cause faster wear and corrosion of the product. Please observe the
special maintenance instructions in
Chapter 8.2 Maintenance intervals on page
2�1
Automotive use
Î
For automotive purposes, use only WEH
®
Filters with e1-approval in vehicles with
road registration.
Please note:
WEH does not provide standard maintenance for automotive use when
catalog items are ordered.
2�2
Industrial use
Î
For industrial purposes, use only WEH
®
Filters with pressure equipment classifica-
tion in vehicles without road registration such as industrial trucks and in industrial
systems (e.g. fueling stations).
Please note:
Industrial use of the filter may require maintenance at regular intervals.
Please refer to the
Chapter 8. Inspection | Maintenance for industrial articles only on
.
- The WEH
®
Filter for vehicles without road registration and industrial systems is
generally classified as pressure accessory in accordance with Article 2 (5) of the
Pressure Equipment Directive 2014/68/EU and is considered to be similar to piping.
This WEH
®
Product may not be used as safety accessory. Furthermore, it is pointed
out, that this WEH
®
Product is designed and placed on the market in accordance
with the requirements of Article 4 (3) of the Pressure Equipment Directive
2014/68/EU. The assessment with regard to a different classification can, however,
be made on request.
Caution:
Any use beyond the scope of application is considered as unintended use
and may result in personal injury and/or property damage.
MD-10211-L51-R1.1.0-03
Page 10
Operating instructions
AE
