manualshive.com logo in svg

Wegener UNITY500, Manual

Share
Download
Wegener UNITY500 Manual Download Page 31

UNITY 500

Page 31

Page 31 of 56

800001-01

2.7.8 

Audio Settings

Audio Settings:

1.

 

While on the Main Menu page, Press <SELECT> until ‘Audio Settings’ is highlighted

2.

 

Press <ENTER> to enter the highlighted menu.

3.

 

Press <SELECT> to place the cursor on the field you wish to edit.

4.

 

Press <ENTER> to enter the highlighted field.

5.

 

Press <ENTER> to cycle the digit or field item.

6.

 

Press <SELECT> to move to the next Item or Digit to be changed.

7.

 

After completing all changes, Press <SELECT> to select ‘Activate Selection.’

8.

 

Press <ENTER> to place the new settings in memory. This activates any changes you have
made.  If you exit without moving to this option and pressing <ENTER>, the unit will not
retain those changes.

9.

 

Press <SELECT> to move cursor to “Return” field.

10.

 

Press <ENTER> to return to the Main Menu.

AUDIO SETTINGS

Audio Routing:

STEREO

Program:

RUS

Attenuation Level (dB): 0

Activate Settings

Return to Main Menu

Summary of Contents for UNITY500

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands