background image

www.wegener.com

  800032-02 Rev. G

1

 

General Information

If equipped with a receiver card, the 

Unity 4600

 receives an L-band RF carrier from an external LNB, 

demodulates the carrier, and then extracts the MPEG transport stream. If equipped with an ASI 
transport card, it decodes the ASI line code and extracts the resulting transport stream. In both cases, if 
conditional access has been applied, the 

Unity 4600

 then descrambles the transport stream (or 

individual programs) if authorized. It then supplies that stream to the DVB-ASI output (with program 
mapping, if enabled). It also may decompress a selected program to provide composite video and two 
stereo-audio outputs. (The compressed audio formats may be MPEG or Dolby AC-3.)

This guide provides information for setup and initial operation of the 

Unity 4600

. For a full description of 

refer to the 

Unity 4600 User's Reference Manual

 (p/n 800032-01) available on the worldwide web at 

www.wegener.com.

Unpacking and Inspection

The box containing the unit should include:

Carefully unpack the items and inspect for obvious signs of physical damage that might have occurred 
during shipment. Any damage claims must be reported to the carrier immediately. Be sure to check the 
package contents carefully for important documents and materials.

Note:

Save the original packing materials and shipping containers in case the unit must be returned 
for repair. Packing the unit in another container in such a way that the unit is damaged will void 
the warranty. 

Environmental Operating Conditions and Physical Specifications 

The table below lists the 

Unity 4600

 environmental limits and physical specifications

Unity 4600

PROFESSIONAL MEDIA RECEIVER

Quick Start Guide

 

Unity 4600

 

this 

Quick Start Guide

 

power cord

 

UL Safety sheet

Item/Limit

Specification

Use

Indoor only

Altitude

Up to 2000 meters

Temperature Range

+10° C to +50° C

Relative Humidity (max.)

Maximum relative humidity of 80% for temperatures up to 31° C 
decreasing linearly to 50% relative humidity at 40° C.

Weight

~10.5 pounds (4.76 kg)

Dimensions (H x W x D)

1.75" x 19" x 15" or 44.5 mm x 483 mm x 381 mm

Input Power Rating

90-132Vac or 175-264Vac, 43 Watt, 50/60 Hz

Summary of Contents for UNITY 4600








Reviews: