Wegener muzak FM2 1999, Instruction Manual, Page: 13 / 16

13 1999-001
4.2 SPECIFICATIONS
Table 4-2 lists the technical characteristics and specifications of the receiver.
TABLE 4-2. MODEL 1999
FM
2
® ADDRESSABLE SATELLITE
AUDIO RECEIVER, TECHNICAL SPECIFICATIONS
Characteristic Specification
RF Input F Connector 75 ohm typ.
RF Frequency Range 950 to 2050 MHz
RF Frequency Selection Synthesized, 256 kHz steps, Network controlled
Input Level Range -30 to –60 dBm
Noise Figure 18 dB
AFC Range +/- 4 MHz
IF Bandwidth 17.5 MHz
Subcarrier Frequency Range 0.150 to 4.60 MHz
Audio Output Impedance 1000 ohm typical
Audio Output Level Adjustable, –6 .0 to +4.0 dBm, at ppl
Audio Output Level (boosted ) 6 dB above normal
FM Deemphasis 300 uS for 7.5 KHz
75 uS for 15 KHz
Audio Mute >60 dB
Audio Fade 30 dB over 2 seconds (typ.) followed by mute
THD @ 1Khz <1.0%
Audio Processing Wegener PANDA® I
Audio Subcarrier Frequency Selection Synthesized, 2.5 kHz steps, Network Controlled
LNB Power Rectified/filtered so as to produce Instantaneous
voltage, 15V minimum with 170 mA maximum
current (short circuit protected; ripple never drops
below 15V)
Power Requirements External Transformer
Input Voltage 105 to 130 VRMS
Frequency 47 to 63 Hz
Consumption 22 watts
PANDA is a registered trademark of Wegener Communications, Inc.