Wegener DTV742, User Manual, Page: 28 / 50

DTV 742 User’s Manual
800057-01 Rev. B 28 wegener.com
Config Out
(1, 2, 3, & 4)
Page Each Config Out page ( Figure 3.5 Config Out 1 Page on page 29) is associ-
ated with the ASI output of the same number ( Config Out 1 for ASI 1 , for
example). Instructions given for Config Out 1 apply to the other three Config
Out pages as well.
As with the Config In page, the left side of the screen lists all input programs
for reference. The right side of the screen is the location for selecting programs
to be placed in the multilplexed output.
The first two columns show the RF input and program number for each Pidset
(PID group) as set up on the
Config In page. The remaining columns are used
to configure the output.
The Enabled check box is used to select the programs to be used in the output.
In the screen shown below, RF Input 2, Program 3 and RF Input 2, Program 2
have been selected to be included in the output for ASI Output 1.
16 0x110 to 0x11f
17 0x120 to 0x12f
18 0x130 to 0x13f
19 0x140 to 0x14f
20 0x150 to 0x15f
21 0x160 to 0x16f
22 0x170 to 0x17f
23 0x180 to 0x18f
24 0x190 to 0x19f
25 0x1a0 to 0x1af
26 0x1b0 to 0x1bf
27 0x1c0 to 0x1cf
28 0x1d0 to 0x1df
29 0x1e0 to 0x1ef
30 0x1f0 to 0x1ff
31 0x200 to 0x20f
32 0x210 to 0x21f
Table 6: DTV742 PID Group (Pidset) Addresses
PID Group PID Addresses