800043-02 Rev. A
Page 4 of 6
July 21, 2004
Main-level Screens
Second-level Screens
ASI Input 1
Press
ENT
and use the
5
5
or
6
6
keys to select <ON> or <OFF>, enabling or
disabling this input. Press
ENT
again to confirm.
Press the
4
4
key to go to the ASI Input 2 Screen.
Press the
ESC
key to return to the main-level Input Setup screen.
ASI Input 2
Functions for ASI Input 2 Screen are identical to those for ASI Input 1.
Press the
4
4
key to go to the RF Input 1 screen.
Press the
3
3
key to go to the ASI Input 1 screen.
Press the
ESC
key to return to the main-level Input Setup screen.
RF Input 1
Press
ENT
to go to the third-level Tuner Enable, Channel Number, and RF
Standard Screens.
Press the
3
3
key to go to the ASI Input 2 screen.
Press the
ESC
key to return to the main-level Input Setup screen.
Input Setup
Press the
ENT
key to bring up the second-level ASI Input 1 screen.
Press the
4
4
key to go to Program Status.
Press the
3
3
key to go to Clear Errored Seconds (if counter is non-zero) or
Alarms/Warnings.
Press the
ESC
key to go to the Home Screen.
RF Input 2
Functions for RF Input 2 Screen are identical to those for RF Input 1.
Press the
3
3
key to go to the RF Input 1 screen.
Press the
ESC
key to return to the main-level Input Setup screen.
Program Status
Press the
ENT
key to view the second-level program status screens.
Press the
4
4
key to go to Front Panel Timeout.
Press the
3
3
key to go to Input Setup.
Press the
ESC
key to go to the Home Screen.
2
nd
-level Program Status
where
XXXXX
is the program number at input,
AAAAAAA
is the service
descriptor for the program,
YYYY
is the hexadecimal program number at output,
and
BBB
is the available audio for the program (AC-3, MPEG, or MPG/AC-3).
Press the
4
4
key to view the status of the next program (all programs may be
viewed though only programs 1 through 16 may be used.
Press the
ESC
key to return to the main-level Program Status screen.
Front Panel Timeout
Press the
ENT
key and then the
5
5
or
6
6
key to select the front-panel help
timeout (No Timeout, or 3, 5, 10, 30, or 60 seconds). Press the
ENT
key to
confirm the selection or
ESC
to cancel.
Press the
4
4
key to go to IP Setup.
Press the
3
3
key to go to Program Status.
Press the
ESC
key to go to the Home Screen.
P r o g r a m S t a t u s . . .
F r o n t P a n e l T i m e o u t
1 0
I n p u t S e t u p . . .
A S I I n p u t 1
A S I I n p u t 2
R F I n p u t 1
P r o g I n X X X X X A A A A A A A
P r o g O u t Y Y Y Y B B B
R F I n p u t 2
