manualshive.com logo in svg

WEG RS485-ETH-N, User Manual, Page: 10 / 32

Share
Download
WEG RS485-ETH-N User Manual Download Page 10

www.weg.net

10 | Ethernet / Serial Gateway - RS485-ETH-N 

3.  Writing RS485-ETH-N IP address to the Web browser. (Will be explained in “Section 4”).

Figura 2.4: RS485-ETH-N Web interface

NOTE:

 In order to access RS485-ETH-N web interface; operator should change RS485-ETH-N default IP and 

other related settings with using WEG GATEWAY MASTER software.

2.3 REQUIRED INSTALLATIONS FOR CONFIGURATION SOFTWARE

In order to configure RS485-ETH-N over USB port, required installations will be explained in this section.
Operator can find necessary files in the CD that is in product box.

 

„

Setup=>WEG GATEWAY MASTER.exe must be installed for RS485-ETH-N configuration software.

2.3.1 Installing RS485-ETH-N Configuration Software

Run WEG GATEWAY MASTER.exe which resides in the CD that comes with the product.
After selecting the desired target where software will be setup, click on the “Next” button and continue with the 
next step.

Figura 2.5: Weg Gateway Master-first step

Summary of Contents for RS485-ETH-N

































Reviews:

No comments