WEG CFW500-ENC, Operation Manual

Page: 5 / 36

ENC Encoder Input Plug-in Module
E
ng
lis
h
CFW500 | 5
1 SAFETY INFORMATION
1.1 SAFETY WARNINGS
NOTE!
„
Only use the (CFW500-ENC or CFW500-
ENC2) expansion plug-in module with
encoder input in CFW500 series WEG
inverters.
„
We recommend reading the inverter user´s
manual before installing or operating this
accessory.
„
This guide contains important information
for the correct understanding and proper
operation of this module.
1.2 PRELIMINARY RECOMMENDATIONS
ATTENTION!
„
Always disconnect the general power
supply before connecting or disconnecting
the accessories on the frequency inverter.
„
Wait at least 10 minutes to guarantee
complete de-energization of the inverter.
2 GENERAL INFORMATION
This guide provides instructions for the installation,
configuration and operation of the plug-in expansion
module for encoder reader input (CFW500-ENC or
CFW500-ENC2).
The Plug-in module for encoder has two differential
channels, "A" and "B" designed up to 400 kHz
incremental encoder reader frequency. Moreover, it has a
config5 V or +12 V output supply for quadrature
encoder operation.
3 PACKAGE CONTENT
When receiving the product, check if the package
contains:
„
Accessory in antistatic packaging.
„
Installation, configuration and operation guide.