8 | CFW300
E
ng
lis
h
General Information
2.5 RECEIVING AND STORAGE
The CFW300 is supplied packed in a cardboard box. There is an identification label affixed to
the outside of the package, identical to the one affixed to the side of the inverter.
Verify whether:
The CFW300 identification label corresponds to the purchased model.
Any damage occurred during transportation.
Report any damage immediately to the carrier.
If the CFW300 is not installed soon, store it in a clean and dry location (temperature between
-25 ºC and 60 ºC (-13 ºF and 140 ºF)), with a cover to prevent dust accumulation inside it.
ATTENTION!
When the inverter is stored for a long period, it becomes necessary to perform
the capacitor reforming. Refer to the procedure recommended in
PREVENTIVE MAINTENANCE on page 28
of this manual.
