weewell WPB 820, User Manual

Page: 4 / 20

I
WPB 820 USER MANUAL
4
2. BREAST PUMP PARTS’ LIST
a. Breast Shield
b. Pump Motor
c. Valve
d. Milk Bottle
e. Standing Base
f. Silicon Diaphragm
g. Adapter
3. DESCRIPTION OF THE ELECTRICAL PROPERTIES
Input: AC100V-240V ǁ Output: 4.5VDC,1A
4. SPECIFICATION
4.1. Clean and Sterilize Your Pump
Please clean and sterilize your pump for the first time and after use
Sterilizing Way
• Pull the pump’s engine(b) to relocate it elsewhere.
Separate all parts (a, c, d, f) then wash in warm soapy water and rinse. Do not use antibacterial or abrasive
cleaners/detergents.
• Sterilize all parts in steam sterilizer, or by boiling for 10 minutes. If using a steam sterilizer, the pump will
remain sterile in the sterilizer for a minimum of 4 hours, provided the lid is not removed.
Important: NEVER WASH OR STERILIZE the pump’s engine (b). You can wipe it using a soft cloth.
Suggestion 1. Use steam sterilizer for sterilize. Not recommended boiling. Firstly, the product is easy to
damage If improper sterilization. Secondly, this unscientific method of sterilization can not achieve the
complete effect. If use boiling, note that be more water in pot, float the product, people do not leave. Not too
long.
Suggestion 2. For the lactating mothers, breast relatively high frequency (typically 2-3 hours once), not
suggest clean and sterilize each use. Excessive disinfection and cleaning accessories could easily lead to
premature aging, reduce the life of a breast pump. Thoroughly clean the stain and steam sterilized once a day
is recommended.
Important! If the breast pump is for the purpose of storage, be sure to disinfect all breast pump parts,
otherwise, milk easy to go bad, difficult to store.