3
/
5
2.
Accessories List
1.Power Supply (100V-230V,24V@5A,120W)
2.Filament
3.SD Card
4.Card Reader
5.Shovel
6.Glue Stick
3.
Operate Introduction
How To Print Your First Model.
Step 1. Filament In
（
1
）
Pull the filament from the accessories, make sure the front of the filament be straight and
then let the filament get into the nozzle through the feed tube.
（
2
）
When the Printer is Ready
，
Click the knob and get into next menu,
Click “Prepare” and
then
Click “Filament In”; the
Nozzle begin heating, when the nozzle temperature get the
specified temperature, the Extruder gear starts to rotate, filament extrude from nozzle.
