15
Combing Mode: when the nozzle is not printed, the way of the nozzle's running, including off, all
and no skin, it is usually set by default.
Start layers at same position: that is to change the accuracy of the model in the same plane, and it is
generally set the default.
Layer start position X
（
mm
）：
that is, you want to change the X axis coordinates of the position of the
model layer.
Layer start position Y
（
mm
）：
that is, you want to change the Y axis coordinates of the position of the
model layer.
3.2.8
、
"Machine" interface
：
WEEDO series 3D printers include single nozzle and double nozzle machines. At present, the WEEDO
series 3D printers use the 0.4mm diameter nozzle.
3.2.9
、
“Line Width” interface
