Weed Eater 530088132 Instruction Manual Download Page 16

16

your warranty rights and responsibilities, you

should contact your nearest authorized

service center or call POULAN/WEED

EATER at 1--800--554--6723.

WARRANTY

PERIOD:

Any warranted part which is not

scheduled for replacement as required

maintenance, or which is scheduled only for

regular inspection to the effect of ”repair or

replace as necessary” shall be warranted for 2

years. Any warranted part which is scheduled

for replacement as required maintenance

shall be warranted for the period of time up to

the first scheduled replacement point for that

part.

DIAGNOSIS:

The owner shall not be

charged for diagnostic labor which leads to the

determination that a warranted part is

defective if the diagnostic work is performed at

an

approved

POULAN/WEED

EATER

servicing

center.

CONSEQUENTIAL

DAMAGES:

POULAN/WEED EATER may

be liable for damages to other engine

components caused by the failure of a

warranted part still under warranty.

WHAT IS

NOT COVERED:

All failures caused by

abuse, neglect, or improper maintenance are

not covered.

ADD--ON OR MODIFIED

PARTS:

The use of add--on or modified parts

can be grounds for disallowing a warranty

claim. POULAN/WEED EATER is not liable to

cover failures of warranted parts caused by

the use of add--on or modified parts.

HOW TO

FILE A CLAIM:

If you have any questions

regarding

your

warranty

rights

and

responsibilities, you should contact your

nearest authorized service center or call

POULAN/WEED

EATER

at

1--800--554--6723.

WHERE

TO

GET

WARRANTY SERVICE:

Warranty services

or repairs shall be provided

at all

POULAN/WEED EATER service centers.

Call 1--800--554--6723.

MAINTENANCE,

REPLACEMENT

AND

REPAIR

OF

EMISSION

RELATED

PARTS:

Any

POULAN/WEED

EATER

approved

replacement part used in the performance of

any warranty maintenance or repair on

emission related parts will be provided without

charge to the owner if the part is under

warranty.

EMISSION

CONTROL

WARRANTY PARTS LIST:

Carburetor,

Ignition System: Spark Plug (covered up to

maintenance schedule), Ignition Module.

MAINTENANCE STATEMENT:

The owner is

responsible for the performance of all required

maintenance as defined in the instruction

manual.

This engine is certified to be emissions compliant for the following use:

Moderate (50 hours)
Intermediate (125 hours)
Extended (300 hours)

Summary of Contents for 530088132

















Reviews: