Webee Smartee
GETTING STARTED WITH SMARTEE
24
2
Adding Z-Wave devices to Smartee
3-After a new device is detected, it will appear on the left side panel.
4-If the device was successfully added to the Smartee, all the device information
will be at the center panel.
1-Tap on “Add Device” on the right panel for normal power inclusion or
“NW Inclusion” for Network Wide Inclusion.
2- Press the Z-wave button on your device to add it (refer to device user manual).
4-If the inclusion process fails, when selecting the device this message will appear:
“The new device was not successfully added. Please, remove it and try again”.
In this case follow the remove device instruction and try again.