Wedge Clamp Systems Inc. EZE ROLLER, Assembly Instructions Manual

Page: 3 / 11

2
EZE ROLLER ASSEMBLY INSTRUCTIONS
3.
•
Insert the channel mounting bolt through the large hole in the
bottom of the channels and through the Eze Roller base. Place
the nut on the end of the channel mounting bolt, but do not
tighten the nut yet.
•
Loosely insert the two channel wedges under the channel
between the base of the channels and the Eze Roller base as
shown,
4.
•
Take the loose end of the black nylon strap which is attached to the ram carriage and thread
the strap through the roller cap rollers.
•
Install the roller cap and tighten the four roller cap bolts as shown.