Wedderburn Operator Manual
Page 9 of 12
WS202 Digital Bench Scale
5.9.
Units (Change unit
）
Select unit or counting
When the display shows
“units”, press
the
[TARE]
key and then press the
[SET/0~9]
key to choose unit,
then press the
[TARE]
key
to
confirm and exit.
The units that can be choosen: H9(kg), 9(g), Lb.lb, Lb.oz or pcs(counting).
When display returns to weight mode the unit that was selected is indicated by a lit lamp over the unit
wording printed at the bottom of the display window.
If PCS (counting mode) is selected:
When “pcs”
is displayed, press
the
[TARE]
key. Now lamp over
“pcs”
is lit.
To set the weight and number of samples for counting.
Long time press the
[ON/ZERO]
key
,
the display will show
“
count
”
and return to
“
0
”
.
Place a number of samples upon the weighing pan (The weight should less than Max. capacity) and press
the
[TARE]
key
.
The display shows all zeros with one flashing, the lamp above the PSC will also be flashing.
To set the sample number, press
[SET/0~9]
key
to add 1 to the flashing unit number or move to next lowest
digit by pressing the
[TARE]
key. Press the
[SET/0~9]
key moving down through the digits untill the scale
returns to count mode. The unit count is displated.
Remove sample load and add load to be counted. The display will indicate the count.
Note:
The greater the number of the sample units the greater the accuracy of the count.
5.10.
To exit counting mode
Re enter units by pressing and holding the
[SET/0~9]
key, press the
[TARE]
key
to enter and then select
another unit with the
[SET/0~9]
key. Press
[TARE]
key to confirm.
5.11.
A-oFF (Choose auto power off
）
When menu displays
“
A-oFF
”
, press the
[TARE]
key
to enter, press the
[SET/0~9]
key to choose
“
no
”
or
“
yes
”.
“
no
”
is no auto power off,
”
yes
”
is after 10 minutes without weight applied the scale will auto power
off.
5.12.
FILtX (Change display mode
）
When
menu displays
“FILtX”
, press the
[TARE]
key
to enter,. press
the
[SET/0~9]
key to choose
FILt-1,
FILt-2 or FILt-3. P
ress
the
[TARE]
key
to confirm and exit.
FILt-1: Display renew speed is slow.
FILt-2: Display renew speed is fast.
FILt-3: Display renew speed is faster.
