WeCo 5K3-LV-HV
HeSU 5K3-LV HV
Page 38 of 69
V_1.1_21-Nov-2020_LV-HV
2.8.4 Multi Cluster Configurations
1.
Before Using the MASTER HUB device make sure to update the battery Firmware with the specific
version for CLUSTER APPLICATION
2.
To use and set up the MASTER HUB the installer must read the MASTER HUB MANUAL available in the Download Area of
WeCo`s Web Site www.wecobatteries.com
3.
4.
Install the Specific FW on each battery * the Cluster Connection FW has a nomenclature starting with 4.xx ( see web site)
5.
Set the Cluster ID using the WeCo monitor Cluster Software
6.
Connect the HUB ( pre-configured by WeCo at the Order) in case the installers needs to change the Number of modules per
cluster or change the MASTER HUB communication Protocol it will be necessary to use the CAN ANALYST WECO II to set up
the new configuration