Weco Edge 550, Manual

Page: 179 / 221

Maintenance... Consulting the statistics
Edge 580 - Edge 550
5-178
5.7.3.2 T
HE MACHINE
'
S GENERAL OPERATING FUNCTIONS
5.7.3.2.1 C
ONTENT
The statistics related to the general functioning of the machine allow you to consult :
→ statistics relating to the functioning of the machine itself ;
→
statistics based on the last wheel dressing ;
→ statistics based on the lens material ;
→
statistics based on the bevel and rimless finishings ;
→ statistics based on polishing ;
→
statistics based on safety-bevel ;
→ statistics based on groove finishing ;
→
statistics based on drilling finishing ;
→ statistics based on retouches ;
→
statistics based on user’s maintenance ;
→ statistics based on facette finishing (according to machine).
5.7.3.2.2 A
CCESS
/E
XIT
⇒
You may access the desired statistics using the buttons shown above in the paragraph "Presentation of
statistics menu".
⇒
Exit each menu by pressing the button.
5.7.3.2.3 D
ESCRIPTION
5.7.3.2.3.1 General edger statistics display screen
The display screen for the general edger statistics is shown below :
Ecran 5-14 : Consulting general edger statistics
Number of machine
starts
Number of machine
stops without following
close-down procedure
Number of lenses edged
Number of automatic
stops during edgings
Number of manual stops
during edgings
Number of accesses to
machine settings
Number of saved
adjustments
Retouch percentage
General Edger Statistics
Exit