3- Cleaning of the touchscreen
Clean the screen and part infront of the touche screen
after every use with Cidalkan wipes or other alternative.
4- Cleaning of layout plate and lens holder
Clean the layout plate and lens holder after every use with
Cidalkan wipes or other alternative.
5- Cleaning of lens blocker arm
Clean the lens blocker arm after every use with Cidalkan
wipes or other alternative.
6- Cleaning of the tracer drawer and
cover
Clean the tracer drawer and cover after every use with
Cidalkan wipes or other alternative.
Only use the below recommended
solutions. Other solutions may damage or
discolour the device.
LUNEAU TECHNOLOGY OPERATIONS
2 Rue Roger Bonnet-27340 PONT DE L’ARCHE - FRANCE - Tel. + 33 232 989 132
• [email protected] • www. luneautech.com
Wipes - Instructions for use please read carefully !
01
02
03
Take a wipe out of its packaging and close
Clean thoroughly by hand wiping.
Throw away the wipe.
the packaging tightly after use.
Leave the product on for 5 minutes.
Change wipe for each medical
Do
not
rinse.
surface
or
device.
CMJN (print) : 80 / 0 / 7 / 0
RVB : 0 / 178 / 227
Pantone : 306 C
HEX : #00b2e3
CMJN (print) : 67 / 9 / 100 / 0
RVB : 97 / 167 / 48
Pantone : 369 C
HEX : #61a730
REF. 369113
Cidalkan wipes incl. alcohol.
disinfectant
Standards
CE 0459
This document is not contractual - FC001171 - ind 00- April 2020
The screen must be wiped gently without
applying excessive force.
Every mechanical parts must be wiped
gently without applying excessive force.
7- Cleaning the ON/OFF switch
The ON/OFF switch at the side should be cleaned with Cidalkan
wipes everytime after switching off the machine.
Recommendation is to clean it after you take off your gloves.
8- Cleaning of the toolsbox
Proceed to a regular cleaning of the exterior of the toolsbox and
particularly handles.
9- Cleaning of the external
body of the device
Please proceed to clean regularly the exterior of the device.
Most important the region around the edging chamber, the
region around the touchscreen, the region around the layout
plate and, in case of the E.32 (Groove) the region around the
Tracing Unit.
Before cleaning the unit, turn it off and unplug it from the
electric outlet.To clean the plastic surface of the device gently
wipe the top, bottom, and front surfaces.
