1. Installation
Keep connection cables away from high voltage and high current wires.
Keep connection cables away from door motor and door drive.
Avoid direct sunlight or other infrared ingress to the receiver (RX).
Prior to power-on, clean the lenses with a soft, moist (not wet) cloth.
Do not bend or twist the edges and do not scratch the lenses.
2
1.1) Securely fix the transmitter and receiver to
the car/car doors through the fixing holes with the
bolts provided, ensuring that the labels are
pointing outwards.
Please consult us about our range of fixing
brackets and clips.
1.2) Ensure both the receiver and transmitter are
at the same level.
1.3) Fix the power supply on the car top.
Ensure the steel cover is grounded.
1.4) Power supply connected to INPUT terminal.
Output signals connected to OUTPUT terminals.
1.5) Connect cables from receiver and transmitter
to power supply.
Ensure both cables can be easily and smoothly
bent.
Lock tightly both sides of the intermediate
connectors.
1.6) Switch on the power.
Yellow LED in the receiver is lit.
Red LED in the receiver is lit when light beams are
interrupted.
WECO
2. Notes on handling
INFO
Planned Maintenance Procedure
Ensure the yellow LED is lit (system functioning), then clean the lenses with
a soft, moist (not wet) cloth. Check all the plug and terminal connections.
Perform a detection test by inserting an object greater than 50mm between
TX and RX. The red LED status indicator will light up to confirm object
detection.
2000
1805
1495
1075
655
235
Min. 5mm
310
420
02
4
02
4
235
5x Ø4
0
