5
ENGLISH
Troubleshooting & Understanding
the Light
The light on the side of the Drive
AS100
indicates whether the system is working or if
there are problems . Take the following steps
based on the indicator light color when using
the Drive
AS100
.
Light off:
If the light is not on:
• Check connections on the power supply
to see that it is firmly plugged into both
the Drive
• If using a
AS100
and the power source .
DC power supply in your
vehicle, ensure the power supply is
properly inserted . Then check the 12 volt
power from the car socket and the fuse .
Replace the fuse if necessary .
• If using a power strip in a building,
ensure the power strip is plugged in and
turned on and that power is coming from
the outlet .
Red light:
An red light indicates the Drive
AS100
has powered down to protect the cell
tower . Separation between the
Drive AS100
and
the Outside Antenna is important to prevent
oscillation (feedback), similar to when a
microphone is too close to a speaker . When
oscillation occurs, the
Drive AS100
shuts down in
order to prevent interference in the cell tower .
If the light is red, move the Outside Antenna
farther away from the
Drive AS100
. On a vehicle,
that usually means moving it farther toward the
back of the car . Remember to keep the antenna
at least 16cm from any window or sunroof .
In an office, move the location of the
Drive AS100
farther from the window where the antenna is
mounted . Once you have separated the Outside
Antenna and the
Drive AS100
, reset the
Drive
AS100
by disconnecting the power and then
reconnecting the power supply . If the light is
green, the
Drive AS100
is working properly . If
the red light is still on, move the Outside
Antenna farther away and repeat the process .
Green Light:
A green light indicates the Drive
Arms
Adjusting the Drive
AS100
Various sized arms are included with your
Drive
AS100
. These provide you with options to
customize the Drive
AS100
to fit virtually any
cell
phone .
• To change arms, gently lift the arm
upward until the arm slides free from
the Drive
AS100
.
• To
a
m above
a different slot on the Drive
AS100
and
gently slide the arm down until the arm
is
firmly in place. Your cell phone must be
in
the cradle for the Drive
AS100
to amplify
the signal .
Need help?
AS100
is working properly .
• www.techlineglobal.com
