weBoost 472005 Installation Instructions Manual Download Page 8

8

6

 

Additional FAQ: 

How does weather affect the 
performance of my Outside Antenna?

Water vapor (e.g. rain, fog, snow or 
other precipitation) creates an effective 

filter to cellular signal.  In times of 

heavy precipitation, you may see less 
performance.

What’s the difference between the 800 
MHz and the 1900 MHz bands? How do 
I know which MHz band my cell phone 
uses?

The Connect 3G works with all major 
North American cellular providers on 
the 800 & 1900 MHz frequencies.  
Traditionally, 800/1900MHz are associated 
with voice and 3G data; while 700MHz 
and 1700/2100MHz are associated 
with 4G data. 

Kit 301121-40010 

• 50 Ohm Dome Antenna
• 10’ LMR400

Kit 311135-40060 

• 50 Ohm Wall Panel Antenna
• 60’ LMR400

Kit 301151-0610

• 75 Ohm Dome Antenna
• 10’ RG6 Cable

Kit 311135-5820

• 50 Ohm Wall mount Panel Antenna
• 20’ RG58 Cable

Kit 311155-40060

• 50 Ohm Wall Mount Panel Antenna
• 60’ LMR400 Cable

Kit 301151-1110

• 75 Ohm Dome Antenna
• 10’ RG11 cable

Kit 311155-1150

• 75 Ohm Wall mount Panel Antenna
• 50’ RG11 Cable

Kit 301211

• Desktop Antenna w/ 5’ RG174

Inside Antenna Kits

Kit 309900-50N

• 2 - Wall Panel antennas
• 1 - 50 ohm 3-Way Splitter

Kit 309905-50N

• 3 - Wall Panel Antennas 
• 3 - 2-Way 50 Ohm Splitters

Kit 309902-75F

• 2 - Wall Panel Antennas

• 1 - 3-Way 75Ohm Splitter

Kit 309903-75F

• 3 - Wall Panel Antennas
• 3 - 2-Way 75Ohm Splitters

Kit 309904-75F

• 1 - Wall Panel Antenna
• 1 - 2-Way 75 Ohm Splitter

Inside Antenna Expansion Kit 

Summary of Contents for 472005












Reviews: