8
DET
paper in front of the camera, and do SHADING DET. If
not, abnormal video might be output.
SHADING
It compensates the difference of light caused by lens.
To use this function, you should run Shading DET
function first at System menu.
DEFOG
Images can be corrected on Fog, Dust environment.
- AUTO : Automatically corrects the images.
- MANUAL : can be set to LOW, MIDDLE, HIGH.
COLOR BAR
Output Color bar for test purpose (2 types).
If there is no user action, it shows for about 1 minute.
WDR
This 3D backlight compensation function allows bright and dark area to
be seen clearly together.
- WDR WGT(0~4) : Select image mix ratio. The higher value, the bright
part of the image appear more clearly.
BLC
Back light compensation function.
- BLC LEVEL(LOW, MIDDLE, HIGH) : Set BLC level.
- BLC OSD : Displays BLC area on the screen.
- BLC POS-X, Y : Set X, Y start position.
- BLC SIZ-X,Y : Set Width and Height size.
- MASK : If there is very bright portion inside BLC area, this portion can
be removed from the calculation of BLC compensation. This brightness
level for masking can be decided by below MASK LEVEL.
- MASK LEVEL(0~10) : Set brightness level for Masking.
HLC
High Light Compensation. If there is very bright portion inside a scene,
camera can mask the portion, and the portion is removed from the
calculation for exposure control.
- LEVEL(
5
, 0~10) : Set the brightness level for masking.
- Color : Set masking color
ACE
(ON,
OFF
)
Adaptive Contrast Enhancement. Enhances image quality by raising the
brightness of dark areas.
DNR
(LOW,
MIDDLE
, HIGH)
Reduce image noise under low light condition
FRAMERATE
(25Hz, 30Hz)
Power frequency 60Hz(NTSC) : 30Hz(fps) video out
Power frequency 50Hz(PAL) : 25Hz(fps) video out
SYSTEM
MODEL
Displays model name
CAM ID
Max. 8 digits for camera name.
Supports alphanumeric and some special characters
RS485 ID
Set ID for RS485
VERSION
Displays firmware version
VIDEO
Full-Scale(BT 709), Comp-Scale(BT 601) support
RESOLUTION
Displays video output resolution(
1080p
/720p)
