WebGate C1080BL-IR18-AF, Installation And User Manual

Page: 2 / 64

1
Caution for installation and usage
1. Check Frame rate setting based on power frequency
- Set Frame rate to 25Hz if your region is using 50Hz(PAL) power frequency, or set to
30Hz for 60Hz(NTSC) region. (OSD : System

Frame rate).
2. Focus setup
To aviod losing focus at night time, please adjust camera focus as follows.
1) Move Tele, Wide to adjust Zoom and Near, Far to adjust Focus.
2) Press joystick shortly to activate Auto focusing.
3) If no further action during 5sec, adjust focusing mode will be closed automatically.
※ To get fine focusing, video will be zoomed twice in Adjust Focusing mode.
3. Shutter mode setup based on installation environment
Choose shutter mode based on installation environment as follows to minimize motion
blur of a moving object.
- Auto : This mode can maximize sensitivity under low light condition, but if the target
object is moving fast, motion blur could appear. You can use DSS, WDR
functions at this mode.
- Indoor : This mode can provide more clear moving image such as person in indoor
environment.
- Outdoor : This mode can provide more clear moving image such as vehicle in
outdoor environment.
* Under Indoor/Outdoor mode, DSS, WDR functions cannot be used and low-light
performance will be decreased. If you do not consider the environmental condition of
the installation site, malfunction of exposure might appear.
4. DC12V or AC24V(500mA over) power adapter must be used.
5. Please contact to qualified service personnel in case of product damage. Do not
attempt to repair product by yourself.
6. Please avoid external shock and vibration on the product.
7. Do not install product under excessive heat or cold environment. (recommended
operation temperature is 0 °C ~50 °C )
8. Do not target lens to the sun. Image sensor might be damaged
9. Do not open the product under any circumstances, it could void the warranty. Natural
disaster like lightning, flood will need charge for repair.
En
gl
ish