103524_SHB_Rev1.1_080611
MPE 750 NA ATV
2
Service Manual
Page 14
5)
Remove the cable harness from
the spark plugs and the injection
valves. See Chapter
Removing
the spark plugs
.
6)
Remove the oil feed hose (2) on
one side of the oil tank. If necessary,
extend the oil feed hose.
7)
Activate the engine’s starter every
10 seconds in order to let the engine
crank and wait 30 seconds.
8)
Repeat this procedure until the
motor oil is pumped completely
out.
The motor oil in the dry sump tank is pumped out with the help of the engine
dry sump pump.
ATTENTION
Do not let engine crank longer than necessary
to prevent damage due to insufficient lubrication
and overloading of the starter.
Draining the motor oil (continuation)
