Weber Markoprint XB4JET, Manual For Installation, Operation And Maintenance

Page: 129 / 162

Appendix 72800153 Markoprint XB4JET / XB8JET
Seite 129 von 162 GB
Encoder
Encoder input : 24V
Standard : NPN or push-pull max. 100 kHz
Rotary encoder with 4-pole M8 round plug
PIN Description Value Unit
1 Power, max. 10mA + 24 V
2
3 GND 0 V
4 Encoder signal Standard: NPN or push-
pull -
If using a PNP encoder or a PNP Signal as encoder the encoder input must be pulled to
GND with an 1KOhm resistor.
The resistor must be for min.1W and the load is about 25mA.
Fig. 44: Socket 4-pole M8 plug
Cable colours
PIN Cable colour
1 Brown 24V
2
White input
3
Blue 0V (ground)
6
Black input
When using the splitter cable are both inputs / outputs clearly separated.
The output is on a socket on PIN4 (see Fig.45).
PIN 1 BN (brown)
PIN 2 WH (white) PIN 4 BK (black)
PIN 3 BU
(blue)
View on plug back side