Weber GENESIS SILVER-A, Owner'S Manual

Page: 21 / 27

21
Gas Instructions
Refilling the Liquid Propane
Cylinder
We recommend that you refill the LP cylinder before it is
completely empty.
To refill, take LP cylinder to a “Gas Propane” dealer.
Removal of the gas supply cylinder
1) Shut off gas supply.
2) Disconnect hose with regulator from the cylinder.
3) Exchange empty cylinder for a full cylinder.
Connecting the Liquid Propane
Cylinder
WARNING: Make sure that the LP cylinder valve is
closed. Close by turning valve clockwise.
DANGER
Do not use an open flame to check for gas
leaks. Be sure there are no sparks or open
flames in the area while you check for leaks.
Sparks or flames will result in a fire or
explosion that can cause serious bodily
injury or death, and damage to property.
You will need: LP cylinder, a soap and water solution
and a rag or brush to apply it.
1) Connect the hose and regulator.
The regulator illustrations shown in this manual, may not
be similar to the one you are using for your barbecue, due
to different country or region regulations.
Some regulators push ON to connect, and pull OFF to
disconnect, others have a nut that has a left-hand thread
that connects to the cylinder valve. Follow specific
regulator connection instruction.
Position the regulator so that the vent hole faces down.
2) Mix soap and water.
3) Turn on the cylinder valve.
4) Check for leaks by wetting the fitting with the soap and
water solution and watching for bubbles. If bubbles
form, or if a bubble grows, there is a leak.
If there is a leak, turn off the gas and tighten the fitting. Turn
the gas back on and recheck with the soap and water
solution.
If leak does not stop, Contact the Customer Service
Representative in your region using the contact information
sheet provided with your manual. Do not use the barbecue.
5) When leak checking is complete, turn gas supply OFF
at the source and rinse connections with water.