WWW.WEBER.COM
11
GAS INSTRUCTIONS
Check
A) Main gas line to manifold connection (1) .
B) Rotisserie (I .R . Burner) gas line connection (2) .
C) Bulkhead and gas supply hose connection (3) .
m
WARNING: If there is a leak at connection (1, 2, or 3), retighten
the fitting with a spanner and recheck for leaks with soap-and-
water solution. If a leak persists after re-tightening the fitting,
turn off the gas. DO NOT OPERATE THE BARBECUE. Contact
the Customer Service Representative in your area using the
contact information on our web site. Log onto www.weber.com.
D) Side burner hose to bulkhead (4) .
E) Side burner hose to quick disconnect, side burner valve and orifice connections (5) .
F) Hose to regulator connection (6) .
G) Regulator to LPG cylinder connection (7) .
H) Valves to manifold connections (8) .
m
WARNING: If there is a leak at connections (4, 5, 6, 7, or 8),
turn off the gas. DO NOT OPERATE THE BARBECUE. Contact
the Customer Service Representative in your area using the
contact information on our web site.
Log onto www.weber.com.
When leak checks are complete, turn gas supply off at the source and rinse connections
with water .
Reinstall Control Panel
A) To reinstall the control panel assembly, reverse steps for “Remove Control Panel”
as previously described .
B) Verify proper wire connections . Refer to “LIGHT FEATURES” .
m
WARNING: Make sure that all parts are assembled and
hardware is fully tightened before operating the barbecue.
Your actions, if you fail to follow this product warning, may
cause a fire, an explosion, or structural failure resulting in
serious personal injury or death as well as damage to property.
◆
The barbecues illustrated in this
Owner’s Guide may vary slightly
from the model purchased .
1
2
3
4
5
6
7
8
