Weber 42371 Owner'S Manual Download Page 9

99

GAS INSTRUCTIONS

Liquid Propane Cylinder

The liquid propane cylinder manufacturer is responsible for 
the materials, workmanship and performance of the tank. If 
the tank has a defect malfunctions, or you have a question 
regarding the tank, call the tank manufacturer’s customer 
service center. The phone number is on the warning de-
cal, which is permanently attached to the tank. If the tank 
manufacturer has not resolved the issue to your satisfac-
tion, then contact the Customer Service Representative in 
your region using the contact information sheet provided 
with your manual.

REFILLING THE LIQUID PROPANE CYLINDER

We recommend that you refi ll the LP cylinder before it is 
completely empty.

Removal of the LP cylinder

1)  Close cylinder valve (turn clockwise). 
2)  Unscrew regulator coupling by turning counterclock-

wise, by hand only.

3)  Loosen cylinder lock wing nut and turn cylinder lock up 

out of the way. 

4)  Lift cylinder off.
To refi ll, take LP cylinder to a “Gas Propane” dealer.

 

WARNING: We recommend that your LP cylinder be 

fi lled at an authorized LP gas dealer, by a qualifi ed 
attendant, who fi lls the cylinder by weight. IMPROP-
ER FILLING IS DANGEROUS.

 

CAUTION: When transporting the LP cylinder make 

sure the plastic dust cover is in place over the 
valve. This will keep dust and dirt from the threaded 
portion of the valve.

Checking the fuel level in your tank 

Check the fuel level by viewing the color indicator level line 
on the side of the tank scale.
1) Empty
2) Medium
3) Full

(2)

(1)

(3)

(1)

(2)

(3)

Safe handling tips for Liquid Propane Gas 
Cylinders

•  Liquid Propane (LP) gas is a petroleum product as are 

gasoline and natural gas. LP gas is a gas at regular 
temperatures and pressures. Under moderate pressure, 
inside a cylinder, LP gas is a liquid. As the pressure is 
released, the liquid readily vaporizes and becomes gas.

•  LP gas has an odor similar to natural gas. You should 

be aware of this odor.

•  LP gas is heavier than air. Leaking LP gas may collect 

in low areas and prevent dispersion.

•  To fi ll, take the LP cylinder to an RV center, or look up 

“gas-propane” in the phone book for other sources of 
LP gas.

 

WARNING: We recommend that your LP cylinder be 

fi lled at an authorized LP gas dealer, by a qualifi ed 
attendant, who fi lls the tank by weight. IMPROPER 
FILLING IS DANGEROUS.

 

WARNING: If you exchange your LP cylinder, make 

sure you get a similar tank in return. Your LP cyl-
inder is equipped with a quick closing coupling or 
type 1 valve and an OPD (Overfi lling Prevention 
Device). Other LP cylinders may not be compatible 
with your barbecue connection.

•  Air must be removed from a new LP cylinder before the 

initial fi lling. Your LP dealer is equipped to do this.

•  The LP cylinder must be installed, transported and 

stored in an upright position. LP cylinders should not be 
dropped or handled roughly.

•  Never store or transport the LP cylinder where tempera-

tures can reach 125° F (too hot to hold by hand - for 
example: do not leave the LP cylinder in a car on a hot 
day).

Note - A refi ll will last about 20 hours of cooking time at 
normal use. The fuel scale will indicate the propane supply 
so you can refi ll before running out. You do not have to run 
out before you refi ll.

•  Treat “empty” LP cylinders with the same care as when 

full. Even when the LP tank is empty of liquid there still 
may be gas pressure in the cylinder. 

Always close the 

cylinder valve before disconnecting.

 

 

CAUTION: When transporting the LP cylinder make 

sure the plastic dust cover is in place over the 
valve. This will keep dust and dirt from the threaded 
portion of the valve.

•  Do not use a damaged LP cylinder. Dented or rusty LP 

cylinders or LP cylinders with a damaged valve may be 
hazardous and should be replaced with a new one im-
mediately. 

Liquid Propane (LP) Cylinder(s)

•  The joint where the hose connects to the LP cylinder 

must be leak tested each time the LP cylinder is recon-
nected. For example, test each time the LP cylinder is 
refi lled.

Summary of Contents for 42371




















Reviews: