16
Working with the machine
Starting the engine
Press the POWER switch.
After all indicators light up for a few seconds, only the
POWER indicator remains illuminated.
The engine is ready for operation.
If the POWER switch is pressed with the
START/STOP switch in the START position, the
POWER indicator will not light up, and the ALERT
indicator will flash. The engine cannot be started.
In that case, move the START/STOP switch to the
STOP position first.
If not used for approx. one minute after a press of
the POWER switch, the engine will switch off again.
The POWER indicator goes out.
Compacting
WARNING
There is a crushing hazard under the tamping foot from the
movement of the tamper during compacting.
Wear the personal protective equipment.
Only guide the tamper in the grip area of the manual
guidance rod.
CAUTION
There is a crushing hazard between the tamper and the wall
during work in close proximity to walls.
Use extra caution when working close to obstacles
CAUTION
If guided incorrectly, the tamper may tip over during operation.
There is a crushing hazard.
Guide the tamper safely with both hands in the grip area of
the manual guidance rod.
Start the engine.
Set the desired speed at the Speed Change switch.
Guide the tamper with both hands on the manual guidance
rod.
